Hello, I am using YSHIELD graphite coating on all walls in my flat. Floor is shielded with aluminium foils. All walls and floors are grounded.

With the YSHIELD graphite coating (I use HSF54) there's a big problem with EM radiation reflections. Sometimes you cannot paint all inner walls, because the feeling is much worse as before (!) We tried, but it was necessary to scale it off. The removal of graphice coating is very hard, but from some walls it was necessary to remove it.

In most cases (especially in large rooms) according to my experience you can paint only some critical walls, not all walls!

Personally, I recommend shielding and graphite coating only locally (or in a flat with a lot of EM sources around - paint only the enclosure walls and the top walls, never paint all walls, there's too much risk) You have always keep in mind, you have to shield not just walls, but floors and windows as well, because the graphite coating is always making reflections (not such agressive reflections as aluminium foils, but reflections are very strong and I can feel it even when measuring devices shows 0μW/m2) Probably, if you want to make a perfect EM shielding, you have to make a special surface to elimitate the reflections of the EM waves. I don't know, if the reflection of the EM waves will behave as sound waves... Maybe... I don't know. I have heard, that small spires (pyramid-shaped tips) are used in some faraday's cages to eliminate reflections. A perfect shielding in a flat with a lot of strong EM sources around means always a probability of strong reflections and you have to deal with it. Even the angle of metallic louver-boards in my HSF54 shielded flat makes a significant difference in reflections! I can use the only one angle for louver-boards (angle: light passing from above, but fully dowswept, there's dark here even in midday) Different angle of louver-boards in my shielded flat means terrible reflections and I think this can be dangerous for people which cannot feel it. The computer simulation of reflections before the application of shielding will be worth. Graphite coating, shielding foils, textiles - every single piece of a large metallic stuff in flat may cause a difference in reflections. Sometimes a small HSF54 painted wall may cause such reflections you have to immediatelly remove the shielding from it (!) Now, after months and months of experiments in my flat we know this for sure and we found a good solution. With shielding it is better as without! (but I still try to find solution for shielding windows, it's odd to live in dark with metallic louver-boards down, there's really not too much light in my flat)

There's sometimes a very big risk to paint all walls inside the room! I wrote a normal e-mail to my HSF54 dealer about this situation (www.nbit.sk) and he refused to cooperate with me, because he said I am a conspiracy theorist. I just wrote him, according to my experience to paint all walls is a very big danger for some customers. Probably he's using this kind of solution, I know about some people, and they were very unhappy after HSF54 application on all walls, there are rumours that www.nbit.sk suggested this kind solution. And the situation for EM sensitive persons was much worse as before! I know, they have to scale it off sometimes. But I knew, I am going to do experiments in my flat. I never accused www.nbit.sk of anything. But in an unfinished flat he suddenly refused to deliver me necessary materials to shield my flat! (My windows are still unshielded, I have to use metallic louver-boards) www.nbit.sk is selling your products, he's your partner and he was the only one with YSHIELD stuff here in Slovakia. So I ordered foils from Czech republic, they send me 18db foils only, which I returned. I don't know even 33db RDF72 will be enough, another experiment...

What do you think? Shall I order 33db foils for my windows? Or what do you recommend please?

I did a lot of research and we made a lot of experiments in my flat and I can definitelly say, graphite coating causing reflections and you can't detect reflextions with common measuring devices! These were very expesive experiments, because sometimes you have to paint a wall and scratch it off immediatelly! Now I know what will be probably the best solution:

PAINT ONLY THE PERIMETER WALLS AND THE TOP WALLS. FOR GROUNDING USE THE PROPER GROUNDING AND IT's good to use MAGNETS:

https://www.biblik.sk/news/klucom-k-odtieneniu-em-ziarenia-sa-javia-byt-magnety-the-key-to-shielding-and-grounding-the-em-radiation-seems-to-be-magnets/

(I use small Y-SHIELD square magnets along with neodyme magnets from HDDs, I hope I found the best position for small rooms, it's good to use magnets for grounding, but large rooms may be different as small rooms, probably you have to use more shielding sockets and with more magnets for large rooms)

I am working with physicist and my abilities to detect EM radiation without any measuring instruments is very good and proven. I can detect the EM even where measuring instruments can't (my "range" is probably 2m longer as ExTech devices) An experienced man with measuring devices will probably always find a source when a say "I feel the EM here". My sensitivity is much better than the common measuring instruments. It's hard to live in a flat in the downtown. Over 50+ Wi-Fis around and very strong cell antennas near. I couldn't sleep in my flat, with coating it's much better. That's why I choose shielding for my flat and I am using products of your company.

I try to find the best solution to shield windows. Now I use metallic louver-boards. But the darkness in my flat is oppressive. I cannot make a light and unroll the louver-boards, because there are very strong reflections from HSF54 on my walls. So, what do you recommend? Can I use RDF72 foils on my windows? We have standard plastic windows, without any surface finishing. Glass in normal, clean. There's only 1cm wide small very thin metallic frame inside the plastic window. Can I try RDF72 foils for shielding windows?

I cannot touch metallic textile (pain and people will absorb a lot of EM touching metallic textiles), so shielding curtains is the last solution.

I consider all metallic shielding textiles in most cases as a singnificant danger, because the body will probably touch it. (even the silver caps, shirts, etc. - one side deflects, another side reflects. A shielding cap may help when the source of EM is from above, but with shielding cap it may be worse when the EM passes through face and reflects back into brain) Shielding looks always something for something...

Ok, my question is:

Can I use RDF72 for my classic plastic windows?

What's your opinion?

Thank you

Arkan Levov, Biblik.sk, tel. 00421 32 240 00 65
www.biblik.sk
www.biblik.sk/clanky

- mail sent 12:12 (13:12 summer time) to infoWRITEATyshieldWRITEDOTcom

Biblik.sk

biblik.sk/clanky

_____________________________________________________________________